AEM 30-6051 Series 2 Plug & Play EMS - Manual (Page 14)

Page 14 of 15
Connection Diagram for EMS P/N 30-6051
Pin
1999-2002 Honda Accord V6 J30A1;
2002-2004 Honda Odyssey 3.5L V6 J35A4
1999-2003 Acura 3.2 TL/CL V6 J32A1;
2002-2003 Acura 3.2 TL/CL V6 Type S J32A2;
AEM EMS 30-6051 I/O Notes
D1 Lock-up control solenoid valve ← Injector 5 Output Available, switched ground, 1.5A max (connected to B15)
D2 Shift control solenoid valve B ← Injector 7 Output Available, switched ground, 1.5A max
D3 Shift control solenoid valve C ← Idle 1 Output Available, switched ground, 1.5A max
D4 --- A/T gear position switch signal High side 4 Output Available, switched input
D5 Battery flyback solenoid ← Idle 4 Output Available, switched +12V, 1.5A max
D6 A/T reverse switch ← Sensor +5V Output Available, sensor +5V output
D7 Shift control solenoid valve A ← EGT 2 Input Available, jumper set for 0-5V input
D8 A/T D3 sw A/T D4 sw ADCR14 Input Available, 0-5V input, 100Kohm pull up resistor to +5V
D9
A/T D4 sw (1999-2002 Honda Accord V6 J30A1);
A/T D5 sw (2002-2004 Honda Odyssey V6 J35A4)
A/T D5 sw Sensor ground Output Available, sensor ground output
D10 Countershaft speed sensor + ← CAN1H --- Dedicated, CAN high side
D11 Mainshaft speed sensor + ← Vehicle Speed (T3) Input PnP for vehicle speed sensor input
D12 Mainshaft speed sensor - ← Switch 3 Input Available, switched +12V input, 1.5A max
D13
Park switch (1999 Honda Accord V6 J30A1);
2nd clutch pressure switch (2000 Honda Accord V6
J30A1);
3rd oil pressure switch High side 3 Output Available, switched +12V output, 1.5A max
D14 A/T 2 sw A/T 3 sw CAN1L --- Dedicated, CAN low side
D15 A/T 1 sw A/T 2 sw Baro Volts Input Available, 0-5V input
D16 Countershaft speed sensor - ← PW 2 Output Available, boost solenoid output
Wire View of AEM EMS