AEM Infinity Supported Applications - Mitsubishi 1995-1999 4G63 Engine - Manual (Page 3)

Infinity Supported Application 3
© 2014 AEM Performance Electronics
ADAPTER HARNESS OPTIONS
30-3702 Harness, Mini Lead
This harness includes a fused power distribution center with main relay. Pre-terminated connectors are
available for the internal UEGO sensors and AEMNet. A bag of multi-color flying leads is included to
simplify custom harness builds.
30-3701 Connector Kit
This kit includes mating connectors and terminals for the Infinity. It also includes a main relay kit which
is necessary for proper power distribution. This kit is best suited for experienced installers who want to
build their own harness.
30-3600 O2 Sensor Extension Harness
30-3601 IP67 Comms Cable
30-3602 IP67 Logging Cable
IMPORTANT APPLICATION SPECIFIC SETTINGS
Infinity Tuner Wizard Setup
Engine
In the Wizard Engine tab confirm the following settings:
Number of Cylinders = 4
Engine Cycle Type = 4 Stroke
Ignition Type = Wasted Spark
Firing Order = 1-2-1B-2B Wasted Spark
Cam/Crank
In the Wizard Cam/Crank confirm the following setting:
DSM 1G/2G (1990–1999)
Add a text grid control to your layout and select the following channels. Make sure their values match
the settings below for initial timing sync. These values will be populated when the Cam/Crank pattern is
selected.
CamSyncAdjustment = 3
TrigOffset [degBTDC] = 176
Injector Setup
In the Wizard Injector Setup tab confirm the following setting:
Number of Injectors = 4