Electra Amsterdam Royal Light - Manual (Page 3)

AMSTERDAM ROYAL FRONT GENERATOR LIGHT SET-UP
ELECTRA BICYCLE COMPANY ® ,LLC. • 3270 CORPORATE VIEW, SUITE A, VISTA, CA 92081
TEL 760-607-2453 • ORDERLINE 800-261-1644 • FAX 760-598-7350 • WWW.ELECTRABIKE.COM
STEP 3: WIRING AND ATTACHMENT OF FRONT GENERATOR
• LOCATE WIRE GENERATOR PLUG BLOCK
• NOTE ON THE SIDE OF WIRE GENERATOR PLUG BLOCK THERE IS SIGNALING
FOR POSITIVE TERMINALS AND A FOR NEGATIVE TERMINALS
STEP 4: WIRING AND ATTACHMENT OF FRONT GENERATOR CONTINUED
• LOCATE SOLID BLACK WIRE WITH WIRE EXPOSED END (power wire) AND INSERT INTO
POSITIVE TERMINAL HOLE OF GENERATOR PLUG BLOCK
• NEXT, LOCATE THE BLACK/ WHITE STRIPED WIRE WITH WIRED EXPOSED END AND
INSERT INTO THE NEGATIVE TERMINAL HOLE OF GENERATOR PLUG BLOCK
• CONTINUE NEXT BY SNAPPING WIRE PLUG BLOCK INTO BOTTOM OF GENERATOR BODY
• CUT ANY EXCESS ENDS OF WIRE COMING OUT FROM GENERATOR PLUG BLOCK
• ATTACH GENERATOR TO FORK BRACKET USING 10mm BOLT/WASHER/NUT
• TIGHTEN BOLTS (to insure proper ground), TEST GENERATOR/LAMP AND YOUR DONE!
= POSITIVE
= NEGATIVE