Class1 Digital speedometer - Manual (Page 3)

page 3 of 4 pages
Engineering
Standards
Name
Identifier OEM Installation and Calibration
Engineering Standard Number
C1-102007-A
Digital Speedometer Information
4. Electrical
The Speedometer Display is connected to the OEM harness with a Deutsch 8 pin
mini-connector.
Mating Connector: DTM06-08S
Locking Wedge WM-8S
Mating Terminal: 0462-201-20141 20 gauge socket
Terminal Assignments: 1 N/C (no connection)
2 N/C
3 N/C
4 Display Power (Ignition 12 VDC)
5 System Ground
6 N/C
7 Pulses IN (speedometer input)
8 N/C
A usable Pulses In signal is available on the World Transmission wire #157 at the
Vehicle Interface Module connection H-2.