Immediate consumer action required – SCT X4 Power Flash (Ford 7015,GM 7416 ,Chrysler 7215) User Manual
Page 2
SCT PERFORMANCE, LLC.
User’s Manual
*This product is not legal for sale or use in
California on pollution controlled motor vehicles
IMPORTANT NOTES
It is always a good idea to turn-off any vehicle systems that may become active during the
tuning process such as cooling fans, fuel pumps, etc. to avoid draining the vehicle’s battery. To
disable these functions, consult your vehicle’s owner’s manual and remove the fuse for each of
these systems. Also be sure to turn-off the vehicle's stereo and HVAC system. Make sure the
ignition key is turned OFF before you connect your device to the vehicle.
Plug the device into the OBD-II port and wait for the main menu screen to appear. The default
menu screen is “Program Vehicle”. If you are using the device for custom tuning, you will need
to read the vehicle strategy first through the “Vehicle Info” main menu screen and send that
information to your custom tuning dealer. (See Section 4.1)
SCT does not recommend using this device with any other tuning module or device that modifies
the vehicle PCM parameters, increases horsepower, torque or modifies transmission
characteristics.
Before taking your vehicle to the dealer service department for any type of service or warranty
work, you should first return the vehicle back to the stock configuration. Check engine warning
lights can be reset by simply unplugging the battery cables from the battery for 5-10 minutes.
Diagnostic trouble codes can also be read and cleared through the “Vehicle Info” menu.
IMMEDIATE CONSUMER ACTION REQUIRED!
YOU MUST REGISTER YOUR X4 DEVICE WITHIN 30 DAYS OF
PURCHASE TO VALIDATE YOUR 1 YEAR LIMITED
WARRANTY. YOU CAN REGISTER YOUR DEVICE FROM OUR
HOMEPAGE