SCT Xcalibrator 2 DCX (9550) - Manual (Page 2)

Once you have turned the key back on the device will start to save stock
Saving Stock…
XX% Done
Checking
Stock
XX Done
Initializing…
Turn Key Off
Press Select
After the key is turned off, you will go through the module power down procedure,
and then be prompted to turn the key back on.
Module
Powerdown
Leave Engine OFF
Turn Key On
Please Wait XX
Erasing
Memory
Programming
XX Done
Turn Key OFF
Press Select
Success!
Press Select
Now your vehicle is tuned, to return to stock, select the Return to Stock option
Other Information:
Once the Xcalibrator 2 has been used to program a vehicle, the flashing capability
will be locked to that vehicle
Error Recovery:
In the event the Xcalibrator2 does not successfully flash the vehicle, it will display
an error message on the LCD display. If this occurs, you will want to recover the
PCM by turning the key off, following the menu options to Program Vehicle, and
under Program Option, choose the “Return to Stock” option. This will install the
stock file back into the vehicle and allow you to attempt to reflash the vehicle with
the custom program again.
4
Chrysler/Dodge (DCX)
Xcalibrator 2 User’s Guide:
SCT Part number: 9550
PCM Part Number_________________________
Custom File Descriptions:
Program 1____________________________________________
Program 2____________________________________________
Program 3____________________________________________
SCT LLC, 975 Florida Central Parkway Suite 1900, Longwood FL 32750
Phone: (407) 774-2447
Fax: (407)260-6275
Website: www.sctflash.com