Laundry detergents and additives, Warning, Caution – Bosch WFMC3301UC User Manual

Page 15: Loading the laundry, Dispensing the correct amount of detergent, Filling laundry detergent and/or additives

Advertising
background image

15

Occasionally, several wash cycles may

be required in order to remove

persistent, dried on stains.

Sorting laundry according

to care label specifications

See also temperatures settings page

17.

Fabric Types

Machine Wash, Cottons

Ó

Machine Wash,

Permanent Press

Ô

Machine Wash, Delicates

Ò

Hand Wash

Ì

Temperatures

Cold

Á

Warm

Ê

Hot

Â

Do not wash clothes in washing

machine if the care label says Do Not

Wash" or the DO NOT WASH symbol

Ú is on the care label.

Loading the laundry

d

WARNING

d

TO AVOID

EXPLOSION HAZARD!

Items of clothing that have been

pretreated with solventĆbased

cleaning agents, e.g. stain remover

and dry cleaning solvents, represent

an explosion hazard once loaded

into the washing machine.

Therefore, these items must first be

rinsed thoroughly by hand.

CAUTION

Loose debris in the washing

machine drum can damage the

laundry. Before loading the laundry,

check that there is no debris in the

drum.

q Open the door.

q Unfold the sorted items of clothing

and place them loosely into the

drum. Mix up large and small

items. Items of varying size will

distribute better during the spin

cycle.

i

Do not exceed the maximum load.

Overloading will cause poor wash

results and increase wrinkling.

For best results it is recommended to

load the drum depending on the fabric

type, see special programs Page 16 for

information on bulky items, e.g.

comforters :

Full Load

Cotton and Linens

½ Load

Permanent Press, Synthetic Blends

and Knitwear

D Load

Wool, Delicates, Silk

i

Close the door.

Do not trap any items of

clothing between the door and

rubber seal.

Door should be able to close

easily, not by force.

Laundry

Detergents and

Additives

Dispensing the correct

amount of detergent

d

WARNING

d

TO AVOID RISK OF POISONING!

Keep detergents and additives out

of the reach of children.

Measure out the detergent (powder or

liquid) according to:

-

The water hardness. This

information can be obtained from

your local water authority. Soft

water requires less detergent.

-

The amount of laundry.

-

The degree of soiling. Information

on soiling can be found on Page

14.

-

The specifications of the detergent

manufacturer. Measuring the

correct amount of detergent

relieves the strain on the

environment and ensures optimum

washing results.

Too little detergent:

The laundry is not cleaned properly and

will eventually become gray and stiff.

Grayish brown spots (fat globules) may

appear on the laundry. The heater may

calcify.
Too much detergent:

Not environmentally friendly, excessive

suds reduce wash agitation producing

poor washing and rinsing results or

may prevent proper spinning.

Filling laundry detergent

and/or additives

q Open the flap of the detergent

dispenser.

q Add the detergent and/or additive.

Advertising