Optical digital audio specifications, Analog audio specifications – Apple Mac Pro (Early 2009) User Manual

Page 101

Advertising
background image

Chapter 5

What’s Under the Hood

101

Optical Digital Audio Specifications

 Data format: Sony/Phillips Digital Interface (S/PDIF) protocol (IEC60958-3)

 Connector type: TOSLINK optical (IEC60874-17)

 Bits per sample: 16-bit, 20-bit, or 24-bit

Optical digital audio out

Based on a typical situation with playback of a 1 kHz, 0dBFS 24-bit sine wave, 44.1 kHz

output sample rate, unless otherwise specified below.

 Output sample rate: 44.1 kHz, 48 kHz, or 96 kHz

 Signal-to-noise ratio: Greater than130 dB

 Total harmonic distortion + noise: Less than -130 dB (0.00003 percent)

Optical digital audio in

Based on a typical situation with playback of a 1 kHz, 0dBFS 24-bit sine wave, unless

otherwise specified below.

 Input sample rate: 44.1 kHz, 48 kHz, or 96 kHz

 Signal-to-noise ratio: Greater than130 dB

 Total harmonic distortion + noise: Less than -130 dB (0.00003 percent)

Analog Audio Specifications

 Sample rate: 44.1 kHz, 48 kHz, or 96 kHz

 Jack type: 1/8” mini

 Bits per sample: 16-bit, 20-bit, or 24-bit

 Frequency response: 20 Hz to 20 kHz, +0.5 dB/-3 dB

Advertising