Apple Compressor 2 - Manual (Page 123)

Chapter 9 Creating MPEG-1 Output Files 123
Step 2: Choose Audio settings
1 Click the Audio button in the MPEG-1 Encoder pane to open the Audio tab.
2 Select the Enabled box.
3 Choose 44.1 kHz from the “Sample rate” pop-up menu.
4 Select Stereo when using two-channel audio sources, or Mono when using one-
channel audio sources.
5 Choose the bit rate to use from the “Bit rate” pop-up menu.
Configuring the MPEG-1 File Format for DVD Use
The following steps guide you through configuring the MPEG-1 output file format for
DVD use. This process creates two settings, one for video and another for audio,
creating elementary streams.
Creating the MPEG-1 Video for DVD Setting
The following steps create the setting for an MPEG-1 elementary video output file.
Step 1: Create the MPEG-1 Video for DVD setting
1 Open the Settings tab of the Presets window, and choose MPEG-1 from the “Create a
New Setting” ( + ) pop-up menu.
This adds a new setting to the existing list.
2 Name the new setting “MPEG-1 Video for DVD. “
See “ To assign a pre-existing destination preset: ” on page 68 for more information.
Select to enable the
Audio tab. Choose the 44.1 kHz
sample rate.
Select the number of
audio channels. Choose the bit rate.