Apple MacBook (13-inch, Early 2008, Late 2008) User Manual
Page 44
44
Chapter 4
Problem, Meet Solution
 Wait a few seconds. If the computer doesn’t soon start up, shut it down by holding
down the power (®) button for about 8 to 10 seconds. Disconnect all external
peripherals and try restarting by pressing the power (®) button while holding down
the Option key. When your computer starts up, click the hard disk icon, and then click
the right arrow. After the computer starts up, open System Preferences and click
Startup Disk. Select a local Mac OS X System folder.
 If that doesn’t work, try using Disk Utility to repair the disk:
 Insert the Mac OS X Install Disc 1 into your computer.
 Restart your computer and hold down the C key as it starts up.
 Choose Installer > Open Disk Utility. When Disk Utility opens, follow the instructions
in the First Aid pane to see if Disk Utility can repair the disk.
If using Disk Utility doesn’t help, you might need to reinstall your computer’s system
software. See “Reinstalling the Software That Came with Your MacBook” on page 51.
If your MacBook doesn’t turn on or start up
Try the following suggestions in order until your computer turns on:
 Make sure the power adapter is plugged into the computer and into a functioning
power outlet. Be sure to use the 60W MagSafe Power Adapter that came with your
MacBook. If the power adapter stops charging and you don’t see the indicator light
on the power adapter turn on when you plug in the power cord, try unplugging and
replugging the power cord to reseat it.
 Check whether the battery needs to be recharged. Press the small button on the
battery. You should see one to four lights indicating the battery’s level of charge. If a
single indicator light is flashing, allow the power adapter to charge the battery at
least until that indicator light is glowing continuously.