Bosch INTELLIVOX DDC LBC 325X User Manual
Page 10
hexagonal nut. The swivel brackets are mounted to
the rear of the enclosure by four M5 pan head
screws (factory supplied). Refer to Table 4 in
chapter 3.1 for ordering information.
3. The third method is to mount the column directly
to a wall or a dedicated mounting panel by means
of spacers and screws through the mounting
surface. In this case extra attention should be paid
to the following aspects:
•
The threaded inserts are M5 metric and the depth
is 16 mm.
•
It is advised to keep the rear side of the Intellivox
free from the wall in order to prevent unwanted
resonances.
2.5.2. Measures and dimensions.
As mentioned earlier all enclosure dimensions refer to
the Intellivox-2c. Other models or custom supplied
Intellivox DDC | Installation Manual | Installation Guide
Bosch Security Systems | July 2003
EN | 11
Fig 7
LBC 3253/00 Intellivox-2c dimensions, all measures in mm