Connecting the monitor to your computer, Connecting the power cord – Apple AppleVision 750 User Manual
Page 12
Connecting the monitor to your computer
Follow these steps to connect your AppleVision 750 or 750
AV
to your computer.
Note: Although the AppleVision 750
AV
is shown in the illustrations, setup is
the same for the AppleVision 750, unless noted.
IMPORTANT
Before you connect any cords or cables, make sure your computer
is turned off.
Connecting the power cord
1
Connect the socket end of the power cord to the power cord receptacle on the back of
the monitor.
AppleVision
750
AV
Display
WARNING
This equipment is intended to be electrically grounded. Your
monitor may be equipped with a three-wire grounding plug—a plug
that has a third (grounding) pin. This plug will fit only a grounded AC
outlet. This is a safety feature. If you are unable to insert the plug into
the outlet because the outlet is not grounded, contact a licensed
electrician to replace the outlet with a properly grounded outlet. Do not
defeat the purpose of the grounding plug!
12
Chapter 1