Apple Studio Display (17-inch, CRT) User Manual
Page 11
Setting Up
11
Connecting the Display to Your Computer
The monitor weighs approximately 48 pounds. To move the monitor, make sure that the
monitor is facing you. Then lift the monitor by placing your hands on the recessed areas on
the bottom of the monitor.
1
Connect the socket end of the monitor power cord to the power cord receptacle on the back
of the display.
2
Plug the other end of the monitor power cord into the power socket on your computer.
Warning
This equipment is intended to be electrically grounded. This is a safety feature.
Ensure that the computer you are connecting to is grounded. If you use a power cord
with a plug, be sure to connect it only to a grounded outlet. If the outlet is not grounded,
contact a licensed electrician to replace it with a properly grounded outlet. Do not defeat
the purpose of the grounding plug!
Important
Before you connect any cords or cables, make sure that your computer is
turned off and unplugged.
Power cord
Recessed area
for lifting the
monitor
Recessed area
for lifting the
monitor