Removing and replacing the battery – Apple MacBook (13-inch, Aluminum, Late 2008) User Manual

Page 34

Advertising
background image

34

Chapter 3

Boost Your MacBook

This chapter provides information and instructions for replacing the battery, upgrading

the hard disk drive, and installing additional memory in your MacBook.

Removing and Replacing the Battery

You can replace your battery if you need a new one. You also need to know how to

remove the battery if you want to replace the hard disk drive or install memory.

To remove and replace the battery:

1

Shut down your MacBook. Disconnect the power adapter, Ethernet cable, security lock,

and any other cords connected to the MacBook to prevent damaging the computer.

WARNING:

Apple recommends that you have an Apple-certified technician install

replacement drives and memory. Consult the service and support information that

came with your computer for information about how to contact Apple for service. If

you attempt to install a replacement drive or memory and damage your equipment,

such damage is not covered by the limited warranty on your computer.

WARNING:

The internal components of your MacBook can be warm. If you have been

using your MacBook, wait 10 minutes after shutting down to let the internal

components cool before continuing. Use care when handling the battery. See the

battery safety information on page 70.

Advertising