Bose FREESPACE 4400 - Manual (Page 21)

18 of 66
4.0 Hardware Installation
User interface wiring:
Installer’s Note: Use only standard ethernet (Cat 5) cable to
connect the user interface to the FreeSpace 4400 system.
DO NOT use crossover (XOV) cables.
For operating information, see “User Interface Operation” on
page 49.
4.6.4 User interface connections
Connect the user interface from each zone to the appropriate
WALL PLATE CONNECTION jack.
Installer’s Note: Only use standard ethernet (Cat 5) cable
to connect the user interface to the FreeSpace 4400 system.
DO NOT use crossover (XOV) cables.
WALL PLATE
CONNECTOR BLOCK
4400 RJ45
PIN 1-8
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
PIN 7
PIN 8
POS 1
POS 2
POS 3
POS 4
POS 5
POS 6
POS 7
POS 8
PIN 1
PIN 8