Apple Xserve (Early 2008) DIY Procedure for Heat Ssink - Manual (Page 4)

Xserve (Late 2006/Early 2008) Processor Heat Sink Replacement Instructions 4
Caution: Try not to completely remove the screws from the airflow duct. Tiny black rubber
washers hold these screws captive on the underside of the airflow duct. If the screws are
completely removed, these washers can easily fall into the enclosure and become lost.
Processor Heat Sink
Note: Server configurations with a single processor have a regular heat sink and a blank heat sink
installed. The blank heat sink is silver colored (as shown below) and should not be removed
except when replacing a logic board.