Apple Newton Press (for Windows) - Manual (Page 14)

System Requirements
To install the Newton Press application and use it with a Newton PDA, you
need
m An IBM PC or a compatible computer with Intel 80386 or later version
microprocessor
m A VGA display or better
m Windows 3.1, or Windows NT 3.5 or later version,or Windows 95. (If you
are using Windows 3.1, you must turn on your computer’s filesharing and
virtual memory functions. If they are not already on, see Appendix A for
information about turning on these functions.
m 2 megabytes (MB) of free random access memory (RAM) available
m a hard disk drive with 3 MB of available disk space
m an available serial port
m a serial cable (9-pin or 25-pin corresponding to the available serial port).
This cable is not included with the Newton Press package. See
“Connecting A Newton PDA to Your Computer” for more information
about obtaining a cable.
m a Newton PDA
A mouse or pointing device is recommended.
2 Chapter 1