Apple Multiple Scan 14 Display - Manual (Page 17)

The green power indicator light goes on. If the green light does not go on,
check that the monitor is plugged in and press the power switch again. Also,
make sure your computer is plugged in and turned on. If the green power
indicator is flashing, make sure you’ve connected the monitor to your
computer properly (see “Connecting the Monitor to Your Computer” earlier
in this chapter).
Note: If the power light is flashing, your Macintosh may need a video card or
adapter connector to use the monitor. See “Do You Need a Video Card?”
earlier in this chapter.
To make full use of the features available to you with this monitor, install the
monitor software.
Installing the display software
Note: Be sure you’re acting within the terms of the software license
agreement before you install this software on a computer. The license
agreement specifies how many copies of the program you can make for
yourself and others.
The display software works on any computer running Mac OS version 7.1 or
later. To install the display software, follow these steps:
1 Insert the Apple Multiple Scan Software for Macintosh disk into a floppy disk drive.
The disk’s icon appears on the desktop.
2 Double-click the disk icon to open it.
11 Setting Up