Parts replacement cycles and tolerances – MBW WS500 User Manual
Page 13
Advertising
- 10 -
Parts Replacement Cycles and Tolerances
Bearings
Replace anytime a bearing is rough, binding, discolored or removed from housing or
shaft.
Engine Components
Refer to your engine manufacturer’s Owner’s Manual.
Hardware
Replace any worn or damaged hardware as needed. Replacement hardware should
be grade 5 and zinc plated unless otherwise specified.
Safety Decals
Replace if they become damaged or illegible.
Seals, O-rings, & Gaskets
Replace if a leak is detected and at every overhaul or teardown.
Advertising