Lull 1044C-54 Series II Operation Manual - Manual (Page 26)

18
INSTRUMENTS AND CONTROLS
Step 4
4. Turn the steering wheel to the left about one turn.
5. Select ROUND steer mode.
6. Turn the steering wheel to the right until it
reaches the stop. This makes sure the rear
wheels are fully against right stop.
7. Select FRONT WHEEL steer mode.
Step 8
8. Continue to turn the steering wheel to the right
until the wheels reach the stop.
9. Select ROUND steer mode.
Step 10
10. Turn the steering wheel to the left until wheels
are pointed straight ahead.
Step 11
11. Drive the vehicle forward a short distance to
check wheel tracking.
12. Stop the vehicle and select the desired steer
mode.
Note: The above procedure can also be performed in
the left direction.
V1010
V1011
V1012
V1013