ADAM Audio S6A Mk2 - Manual (Page 12)

12
10. Safety Instructions
Please read the following safety instructions before setting up your
system. Keep the instructions for subsequent reference. Please heed
the warnings and follow the instructions.
Do not open the loudspeaker. There are no user-serviceable parts inside. In case of a problem,
please contact either your ADAM dealer or us. We are happy to help. Always refer servicing to
qualified personnel and never attempt to repair this product yourself.
This product, as well as all attached extension cords, must be terminated with an earth ground
three-conductor AC mains power cord like the one supplied with the product. To prevent shock
hazard, all three components must always be used.
Protect the cord from being walked on or pinched.
Never replace any fuse with a value or type other than those specified. Never bypass any fuse.
Always switch off your entire system before connecting or disconnecting any cables, or when
cleaning any components.
Please note that the diaphragms build up a magnetic field. Do not ply with magnetic items at
close range to the diaphragms.
Do not expose this product to rain or moisture, never wet the inside with any liquid and never
pour or spill liquids directly onto this unit. Please do not ut any objects filled with liquids (e.g.
vases, etc.) onto the speaker.
Always use fully checked cables. Defective cables can harm your speakers. They are a common
source for any kind of noise, hum, crackling etc.
Always keep electrical equipment out of the reach of children.
Always unplug sensitive electronic equipment during lightning storms.
The monitor should be installed near the socket outlet and disconnection of the device should
be easily accessible.
To completely disconnect from AC mains, disonnect the power supply from the AC receptacle.
Never use flammable or combustible chemicals for cleaning audio components.
Avoid touching the speaker membranes and do not block the woofer’s ventilation ports.
Never expose this product to extremely high or low temperatures. Never operate this product in
an explosive atmosphere.
High SPL’s may damage your hearing! Please do not get close to the loudspeakers when using
them at high volumes.
Assure free airflow behind the speakers to maintain sufficient cooling.