Bissell Spot Bot 1200 series - Manual (Page 7)

Back view continued
Tough Stain Brush™ Storage
The Tough Stain Brush is conveniently stored
on board.
Power cord
Has a three-prong plug and stores on the back of
the unit around the oval cord wrap.
NOTE: Unwrap the power cord completely
before operating the unit.
Cord wrap
Serves as a guide for the power cord storage.
The cord wrap can be gently pushed in during
use.
Getting ready
1. To fill the clean tank:
A. Remove the clean tank by lifting it straight
up and then away from the unit.
B. Unscrew the cap at the bottom of the clean tank.
There are 2 ways you can fill and use the tank:
2. For common stains such as dirt, grime, pet,
or oily stains, use the fill lines on the left
side of the tank and fill with Little Green
formula (trial sizes included) and water.
3. For dye based stains such as coffee, fruit
juices, cola and red wine, use the fill lines on
the right hand side of the unit and fill with
Little Green and Oxy GEN2 formulas (trial
sizes included) and water.
How to begin
Using the Automatic Smart System™
Your new SpotBot features an Automatic Smart
System that takes the guesswork out of spot and
stain cleaning. With the touch of a button, you
can select the cleaning cycle to use your
preferred method of cleaning.
S
pecial features
O
peration
7
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Tip:
Before spot cleaning with
the SpotBot's Handsfree
feature, dry vacuum the
area first.
A B
2 3