Lukas LSI 400 User Manual
Page 14
14
Lubricate the cutter with a grease gun with
LUKAS special grease as shown in the
picture right.
Excess grease on the lubrication nipple
(see left) after lubrication should be removed
and disposed of professional.
Attention!
When working with upturned blades, in particular, please ensure that no coarse
fragments reaches the mechanical parts under the hand guard of the device. Moveable
parts of the device could be blocked as a result and even be destroyed.
The device must be checked for dirt and impurities in the mechanical part after each
of such applications, and cleaned if necessary.
Unscrew handle and pull back the hand guard according to picture 1.
Clean dirt and shards from mechanical parts as shown in picture 2 and blow out
with compressed air carefully.
The hand guard has to be replaced, if it is considerably worn or torn.
picture 1
picture 2