Lukas Concrete crushers - Manual (Page 8)

8
3. Intended use
CAUTION!
In this case, you must strictly observe any leaks in order to avoid threats to the
environment.
WARNING / CAUTION!
All objects to be worked on must be secured using stable supports or substructures.
The Concrete Crushers are designed for continuous industrial deployment in demolition work.
The Concrete Crushers can be used, in particular, for the crushing of walls, concrete and
reinforced concrete components and for the cutting up of reinforcement.
You do not need to change tools between crushing and cutting work.
The low-vibration method of working not only reduces the physical load on the body of the user
but also facilitates working in vibration-sensitive areas. An additional advantage of the virtually
zero vibrations is the dust-free demolition work which permits working in an enclosed space.
The noise level is also very low as a result of the purely hydraulic method of operation.
This means that the units can also be used in locations that are sensitive to noise. The main
source of noise is the unit required for the generation of hydraulic pressure.
LUKAS Concrete Crushers can also be used under water at a depth of up to 40m (131 ft).
CAUTION!
When cutting with the Concrete Crusher, make sure that you do not cut directly
into the concrete with the blade area. This can lead to increased wear in the
blade area.
The Concrete Crushers must not be used in explosion-risk areas. Sparks can be created
when crushing and cutting from the friction at the crusher arms, and these can ignite explosive
atmospheres.