Beam Electrolux Platinum LCD - Manual (Page 4)

Motor Icon with Sad Face
This screen indicates that the motor has shut down due to an
electrical fault. When the system experiences an electrical
failure it will attempt to automatically reset after a 15 to 30
second delay. Once recovered, the display will return to the
fl ashing Main Screen, indicating that the power unit has been
reset and will operate properly when powered on.
In the event that the system is unable to automatically reset,
the display will switch to the Phone Icon with a Sad Face
screen, indicating the need to contact a Beam dealer for
service. This indicates a motor failure, where service is
needed.
Phone Icon with Sad Face
This screen will be displayed for either of two reasons:
1) The system experiences a failure that requires repairs by
an authorized Beam service technician.
2) The power unit reaches 500 hours in the life-cycle when
the motor brushes and fi lter should be checked for wear.
To resolve this system alert, contact a Beam dealer.
HINT: Changing the motor brushes is an inexpensive way to
increase the overall motor life and is recommended after 500
hours of operation.
© 2012 Electrolux Home Care Products Ltd.
The instructions in this booklet serves as a guide for use
of the Beam Platinum LCD screen. For further information
contact your nearest authorized dealer/distributor.