Mountain Off Road 7686-2 - Manual (Page 2)

M.0.R.E.™ # 7686-2 S.R.S.™ contains the following items:
Photo of contents on page 6 of this instruction sheet.
ITEM DESCRIPTION QTY. PART NUMBER
A BRACKET-DRIVERS SIDE 1 7686-DS
B BRACKET-PASSENGER SIDE 1 7686-PS
C FRAME SPACER PLATE 4 7686-FS
D SHACKLE PLATE 4 9040
E SHACKLE TUBE 2 7686-ST25
F BUSHING-SHACKLE 4 M02221
G BOLT-SHACKLE (1/2” x 4-1/2”) 4 13221
H
NUT-SHACKLE (1/2" CRIMP-LOCK) 4 37268
I BOLT-BRACKET DS (7/16" x l-1/2”) 2 15159
J BOLT-BRACKET PS (7/16 x 1-1/4”) 2 15157
K BOLT-BRACKET (5/8" x 2") 2 15311
L NUT-BRACKET (5/8” CRIMP-LOCK) 4 37036
M NUT BOLT-BRACKET (5/8” x 4”) 2 13319
N BOLT-SPRING PIVOT (9/16 x 4.5”) 2 13271
0 NUT-SPRING (9/16 CRIMP-LOCK) 2 37270
P TUBE SPACER-FRAME 2 S107686
Q FLAT WASHER BRKT BOLT (7/16) 4 33084
R LOCK WASHER BRKT BOLT (7/16) 4 33624
S
FLAT WASHER-PIVOT BOLT (9/16) 4 33088
T
FLAT WASHER-MOUNTING BOLT (5/8”) 8 33090
U
SHACKLE BUSHING INNER SLEEVE 2 S10222
-
INSTRUCTION SHEET 1 7686-2-IS
Please familiarize yourself with all of the components in the kit. The instructions will refer to the item by
letter not description! Read all instructions carefully before work is started on your vehicle. In addition to
basic hand tools, the following specialty tools are needed to perform this installation: Arc Welder (M.I.G.
preferred), Cutting Torch (Oxy/Acetylene), Large hammer and chisel (air hammer preferred), Protractor,
15/16” Wrench & Socket, ½ Drive Torque Wrench, Drill (½ chuck), Hole Saw 1-1/2“ dia., Floor Jack, Jack
Stands (several).
7686-2
Page 2