Mountain Off Road WCK200 - Manual

MOUNTAIN OFF-ROAD ENTERPRISES LLC.
P O BOX 690 DELTA COLORADO 81416
970-625-0500 970-625-3747 Fax
www.mountainoffroad.com
e-mail: [email protected]
Jeep® TJ WRANGLER SPORT CAGE #WCK200
—– INSTALLATION INSTRUCTIONS —–
Read all instructions and Terms-Policies before installing this Sport Cage. If you are installing additional
overhead bars, read those instructions before installing this Sport Cage.
This Sport Cage Part # WCK200 fits 1997-2000 Jeep® TJ Wrangler vehicles. It will fit with hard top, or soft top, full
hard doors or half hard doors. It uses two curved bars to attach to the factory roll bar in place of the stock horizontal
bars that attach to the windshield frame. The cross bar connects the left & right side bars together just behind the
windshield frame. The stock latches for the top will clear the Sport Cage cross bar. The sun visors can be retained
in the stock location. All necessary hardware is provided. We recommend pre-fitting this Sport Cage before you paint
it. This Sport Cage has been designed to be as easy to install as possible. The following tools are required for instal-
lation: 3/8” drill bit & power drill, #40 Torx, #50 Torx (tamper proof-now included with this kit), ratchet, 9/16” socket &
wrench, 13/16” socket, round (rat-tail) file.
CONTENTS:
1-LEFT SIDE BAR
1-RIGHT SIDE BAR
1-CROSS BAR
1-DRIVERS SIDE “L” BRACKET
(Sport Cage to W/S frame)
1-PASSENGER SIDE “L” BRACKET (Sport Cage to W/S frame)
2-BOLTS-3/8”X2-1/4” (Through bolts-cross bar to L&R side bars)
2-CRIMP-LOC NUTS-3/8”
2-WASHERS-FLAT 3/8”
2-BOLTS-9/16”X1-1/2”
2-WASHERS-SPLIT-LOCK
2-WASHERS-FLAT 9/16”X2”
1-#50 TORX
®
BIT (tamperproof)
1-INSTRUCTION SHEET
TERMS-POLICIES:
THIS SPORT CAGE IS A DECORATIVE ACCESSORY DESIGNED FOR APPEARANCE PURPOSES ONLY. DO
NOT RELY ON IT AS PROTECTION FROM VEHICLE ROLL OVER.
FIT and TOLERANCES: All parts that M.O.R.E.™ sells are the results of countless hours of research, testing, fitting and refining. Jeep® vehicles have a
wide tolerances from vehicle to vehicle. In addition to the factory tolerances, some people install aftermarket equipment that may not be compatible with this
M.O.R.E.™ accessory. M.O.R.E.™ has done the best job we can to insure that our parts fit with all of the possibilities. However, you may find it necessary to
grind, elongate, bend, or force the parts in this kit, to fit on your rig. Please use common sense when installing these parts, and understand that if you modify them in
any way, shape or form, they are not returnable!
RETURNS: No returns will be accepted without prior permission from M.O.R.E.™ LLC. You must call for a Return Goods Authorization (RGA) number. Merchandise
must be returned prepaid and insured. A claim must be made with in 30 days from receipt of merchandise. The original invoice or a copy with the RGA number writ-
ten on must accompany all returns. A 20% restocking fee will be charged on all parts returned for credit or refund unless merchandise is proven to be defective or
was shipped wrong by M.O.R.E.™ LLC. No merchandise will be issued credit or refund if it has been installed, modified, used in any way or is in unsalable condition.
WARRANTY:
All merchandise is warranted to be free from defects in materials and workmanship prior to installation. Any alteration or improper use will void
this warranty. Because all parts we sell are intended for use in heavy-duty applications it is not possible to warrantee or guarantee the performance of any items.
M.O.R.E.™ LLC. products and the products manufactured by others, which we sell may be subject to an infinite variety of conditions due to the manner in which they
are used, serviced and/or installed. Purchasers and users of such products rely upon their own judgment as to the suitable use selection, service and installation of
such products.
PRODUCT DISCLAIMER:
Modification of your vehicle to enhance performance with parts sold by M.O.R.E.™ LLC. may create a dangerous condition which
could cause serious bodily injury, and the buyer hereby expressly assumes all risks associated with any such modifications. All parts sold by M.O.R.E.™ LLC., are
for off road use only and never to be used on a public road or highway. Mountain Off Road Enterprises LLC. will not accept responsibility for personal injury or prop-
erty damage arising from the failure of any parts manufactured or sold by M.O.R.E.™ LLC.
Jeep® , AMC® , CJ® , YJ® , TJ®, Wrangler® , are registered trademarks of DaimlerChrysler . Mountain Off Road Enterprises, LLC. is in no way affiliated with
DaimlerChrysler.
M.0.R.E™, BombProof™, S.R.S.™, SlipLoc™, DoubleJointed™, RockProof™, are trademarks used by Mountain Off Road Enterprises, LLC. The M.O.R.E.™
logo and these instructions are copyright©, 2000-2008.
Specifications are subject to change without notice.
Specs:
Tubing: 1-3/4” O.D. x .120w
H.R.E.W. Steel.
Floor Plates: 7 Gauge H.R.
Steel, P&O.
Hardware: Grade 5