Spyclops SPY-DVR16 Quick Start - Manual (Page 3)

Step 4: Set Date and Time
Setup
 System setup – General setup
 Select the correct Date and time.
 Click the ‘Apply’ button.
 Click ‘Yes’ to ‘Are you sure to continue’.
 Ok.
 Ok.
To generate the Esee ID the DVR must be connected to the network through an Ethernet cable.
Step 5: Basic Network Setup
Setup
 System setup – Network setup.
 Check the DHCP box to dynamically assign an IP through the
router and click the Esee box to populate the Esee ID.
 Ok.
 It may take up to 10 minutes for the Esee number to
populate.
“Configuration changed! To save the latest configuration?” Click “Yes” to save your settings.