Spyclops SPY-DVR4960 Quick Start - Manual (Page 3)

Step 4: Basic Network Setup
To generate the Esee ID the DVR must be connected to the network through an Ethernet cable.
Setup
 System setup – Network setup.
 Check the DHCP box to dynamically assign an IP through the
router and click the Esee box to populate the Esee ID.
 Ok.
 It may take up to 10 minutes for the Esee number to
populate.
“Configuration changed! To save the latest configuration?” Click “Yes” to save your settings.
Step 5: Access the DVR from a browser connected to the same network
Setup
 System setup – Network setup -- make note of your
DVR IP address and Esee number.
 In a web browser in the same network, enter the IP address
you just took note of from the DVR.
 Accept the pop up and install Active X controls.
 Enter the username and password for the DVR in the log in
screen and select the log in button.