Spyclops SPY-DVR4960 User Manual - Manual (Page 5)

5
2.0 SYSTEM TOOLS
2.1 User Management
• The default admin user has no password set up, to set up a password you need to highlight
admin, then select “set password”. Skip the “old password” field (since it defaulted blank)
and add a “new password”.
*Note: This will need to be done in order to view the DVR remotely
• You may add a new “user”, but remember that if you want the new user to have access to
setup, system tools AND remote you need to check the “super user” box, otherwise you can
select what this user can see/do in the checkboxes displayed under “username” and
“password”. Hit “OK” and save changes
• If you add a new “user” and forget to assign permissions, simply select the user and choose
“Edit user” to the right. You can then either pick ‘super user”, assign each permission
separately or select permissions by group of “ all”, “setup”, “system tools” or “remote”
• This is also where you can delete users. Simply highlight the user you no longer want and hit
“delete user”, don’t forget to click “yes” and “ok”
*Note: if you forget your password, you can reset it by pushing the up arrow on front of the DVR 10
times to reset the unit back to the default user
*Note: Click “OK” to save any changes then right click twice to save your configurations after every
change you make
2.2 Format the Hard Drive (HDD)
• DVR comes formatted
• To delete the hard drive data, right click with your mouse and select “Setup” then left click to
select “System Tools” then select “HDD management”. Check “√” the Overwrite box and the
format box of the HDD you want to format then click the “Format” checkbox “√” click
“Format”, click “Yes” to start.
• Auto delete old files Choose custom to set up auto delete at the number of days that you
require. *Note: This is helpful in saving Hard Disk space.