Synergy 4018-RHD - JK Onboard Air Compressor Bracket RHD (Viair & ARB) User Manual
4018-rhd jeep jk rhd compressor mount, Parts list, Installation
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
4018-RHD JEEP JK RHD COMPRESSOR MOUNT
GENERAL NOTES:
These instructions are also available on our website; www.synergymfg.com. Check the website before
you begin for any updated instructions and additional photos for your reference.
PARTS LIST:
PART NUMBER – PART DECRIPTION
(1) 4018-RHD Compressor Bracket
Parts / Tools Needed to complete installation:
13mm wrench (ratcheting wrench preferred)
10mm wrench
Phillips head screw driver
APPROXIMATE INSTALL TIME: ½-1 HOUR
INSTALLATION:
1) Note - if mounting a 400H or 450 Series Viar compressor, see additional install steps 6-10
2) Using the fasteners included with the compressor, mount compressor on bracket as shown in the images
below.
ARB:
Viar: