Synergy 5000 - Jeep TJ Front Coilover Bracket Kit - Manual (Page 3)

shock mounts using the supplied 3 1/2" long bolts. The sharper bend of the cross
bar should be positioned on the driver's side of the engine compartment. The
shock bracket should be positioned as shown in Figure 4.
Figure 4
5. Weld the shock bracket to the frame and coil bracket. Weld and let cool. Clean
and Paint the bracket after it has cooled.
6. Position the lower shock mount on the axle. Clean the surface area around the
new shock mount. Position the lower shock mount as shown in Figure 5.