Synergy 5021 - Jeep JK Heavy Duty Front Lower Control Arm Frame Bracket User Manual
Page 8
Advertising
11) Test fit the bracket. The bracket should position in the same relative position as stock.
12) Use a clamp to hold the bracket into position and match the measurements taken in step 4.
13) Once satisfied with fitment, tack weld into position. Tack securely in several places.
14) At this time, reinstall control arm and take some reference measurements to ensure accurate placement.
15) Remove control arm and fully weld in position. Weld as much as desired, we recommend welding as
shown below.
Advertising