BenQ AWL400 - Manual (Page 20)

BENQ Corporation 16
4.4 Encryption
According to WEP function select, this panel allows the entry of 64-bit encryption
and 128-bit key. Each key must consist of hex digits to be written to the driver and
registry. This means that only digit 0-9 and letters A-F are valid entries. Therefore, if
entered incorrectly, the program will not write keys to a driver.
Encryption
Disabled – Disable WEP function
64 Bit – Enable WEP with 64 bit Key
128 Bit – Enable WEP with 128 bit Key
WEP Key to use
Select one of these four keys.
WEP Mode
Select WEP mode – Mandatory or Optional
Authentication Type
Select Open System type or Shared Key type