Synergy 5804 - Jeep TJ/LJ Front Grab Handle Set - Manual (Page 5)

2) Unzip the roll-cage wrap on the tubes that connect the B-pillar hoop to the
windshield. Remove padding and make one cut at the start of the forward cut-out for
the upper window frame. See Picture below.
3) Reinstall padding, do not put cover back on just yet though.
4) Clearance windshield trim for handles.
a. Mark plastic trim using template provided in kit. Template goes on the
inside of the trim and follows the outer edge. See pics for reference.
b. Carefully cut out marked hole for tab clearance.