Synergy 8012-02 - Jeep JK C-Gusset Kit - Manual (Page 6)

5. With upper C-gussets fully welded on, go ahead and move onto the lowers.
6. Again, begin by placing them on the axle to see what areas need to be cleaned up for
welding. See fully welded pictures below for a reference as to what areas get welded.
7. Clean the two ridges on the base of the C along with the bottom half of the tube up to
the shock mount as pictured below.
8. Tack the lower C-gusset on in several locations. We recommend tacking at the end of
the weld for a clean weld. Once tacked, fully weld as shown in the pictures below.