Synergy 8047 - Jeep JK Fixed Front Lower Control Arms - Manual

SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
PPM-8047 JK HD FIXED FRONT LOWER CONTROL
ARMS
Version 1
GENERAL NOTES:
• These instructions are also available on our website; www.synergymfg.com.
Check the website before you begin for any updated instructions and additional
photos for your reference.
• The installation of these control arms will return a 3.0” lifted vehicle back to a
stock caster of 5.0 deg
• With the combination of PPM-8053 caster can be correctly adjusted on all lifts
from 0-6.”
1. The control arms are the same left and right.
2. Arms are designed for additional ground and tire clearance and should be installed as
shown in the picture below.