Synergy 8088 - Jeep JK Rear Remote Reservoir Mount User Manual
Synergy For the car
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
INSTALLATION INSTRUCTIONS
SYNERGY SUSPENSION
PPM-8088 JK REAR SHOCK RESERVOIR
MOUNT
GENERAL NOTES:
• These instructions are also available on our website at www.synergymfg.com.
Check the website for any updated instructions and additional photos for
reference.
• Installation of this bracket can be done with simple hand tools and a power drill of
some kind.
PARTS LIST:
• 1 - PPM-8088 JK Rear Resi Mount
• 4 - 3/8-16 UNC 1” bolt
• 4 - 3/8-16 UNC flange nut
• 4 - 3/8” flat washers
INSTALLATION:
1) Installation can be done with vehicle on the ground.
2) First, fit up the 8088 Rear Resi Mount as pictured below. Position it on the cross-
member which the shock mounts tie into. Center the mount on the cross-member.