Synergy 8519 - 2.5" Shock Towers for 03+ Dodge Trucks User Manual
Page 6
Advertising
o Be sure the bolt is installed from the outside with the nut on the engine
side when the tower is installed in the truck.
o Lastly, we recommend having the hose pointing forwards on the tower,
but again this is up to the installer.
13) Install the tower into the vehicle. Be sure to utilize the HD bolt plate included in
the kit with the 7/16-14 UNC bolts installed from the bottom. Use a washer under
both the bolt head and under the stover nut as shown. The nuts should be on the
top side as pictured below.
Advertising