sPOD Toyota Tacoma 2005-2011 - Manual (Page 2)

s POD Installation Instructions
2005 – 2011 Toyota Tacoma
www.4x4s-POD.com
2
5. Remove lower panel
(a) Remove the 2 bolts.
(b) Disengage the 3 clips and remove the lower
Instrument panel finish panel.
(c) Disconnect the connectors.
6. Open switch blank cut-outs on sides as shown.
File openings or use a Dremel tool
Feed connectors through switch blank
openings as required leaving enough slack
in harness to connect switches.
Unplug
Plug harnesses
together.