Micropump DB-380.B - Manual

1 of 20 MODEL 380 MOTOR INSTALLATION AND OPERATION MANUAL IOM # 7820
REV A
(10/99)
MICROPUMP, INC.
A Unit of IDEX Corporation
PO Box 8975, Vancouver, WA 98668-8975, USA
Phone: (360) 253-2008
Fax: (360) 253-2401
email: [email protected]
Website: www.micropump.com
MICROPUMP LIMITED
A Subsidiary of Micropump, Inc.
Howard Road, Eaton Socon
St. Neots, Cambs. PE19 3ET England
Phone: (44) (0) 1480-356900
Fax: (44) (0) 1480-356920
Website:
www.micropump.com
CONTENTS
Introduction…………………………………
1
Important Safety Information……………… 2
Limits of Use………………………………..
3
Technical Specifications…………………... 4
Description…………………………………. 5
Installation…………………………….……. 6
Operation…………………………………… 8
Maintenance, Service, Fault Isolation……… 10
Warranty……………………………………. 13
Weights and Dimensions……………………14
Declaration of Conformity…………….……
17
PUBLISHED BY
Micropump Incorporated, a Unit of IDEX Corporation
This manual contains proprietary information, which is protected by copyright. No part of this publication may be reproduced,
transcribed, stored in a retrieval system, translated into any language (including computer language), or transmitted in any form
without the written consent of the publisher. For further information contact your local Micropump distributor.
Every effort has been made to ensure that the information contained in this manual is accurate prior to printing. However, the
products described in this manual are subject to continuous development and improvement and Micropump shall not be liable for
any errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this
manual.
INTRODUCTION
Your Micropump Product...
represents years of fluid handling experience and we feel it is the finest product available of its type.
The product you have purchased was designed and constructed for use within designated limits and conditions. Staying within
performance limits and following the guidelines given in this manual will result in excellent performance and maximum pump life.
Should you have a question or a problem, technical assistance is available through a global network of distributors, factory engineers,
and field sales personnel. Micropump products are designed for easy field servicing with service kits and technical support available
for all products.
The Purpose of this Guide....
is to provide information to enable suitably qualified technicians to install, operate and maintain the Micropump range of gear
pumps and gear pump/motor combinations.
How to Use the Guide