Smittybilt 868057 Easy Install Billet Grille - Manual

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 1600 Walnut Parkway, Rancho Dominguez, CA 90220
Installation Instructions
Easy Install Billet Grille (Part #868057)
2005-2006 Chevy Silverado HD
06 Chevy Silverado 1500
NOTE: Carefully read entire instructions thoroughly before
attempting to install this part.
.
NOTE: During shipping product might loose its convex shape or the bars may bend slightly. In order to get a proper fit, product might
need to be re-shaped slightly by bending it BY HAND to regain its convex shape. Be careful not to damage the Billet Grille when
bending.
TOOLS REQUIRED
- Phillips Screwdriver
- 4mm wrench or
Crescent Wrench
- Flathead Screwdriver
INCLUDED COMPONENTS
1 – Billet Grille (2 pieces)
8 –Metal Brackets
8 – M4X30mm Phillips Screws
8 – M4 Flange Nuts
Figure 1 – Included Hardware
INSTALLATION INSTRUCTIONS
1. Inspect product and check components with items listed above.
2. Pop hood, use Flathead Screwdriver to remove 7 factory plastic fasteners (Figure 2). Save fasteners for later use.
3. Remove plastic shroud. Save for later use.
.
Figure 2 – Remove 7 factory plastic fasteners
4. Optional: Use painter’s tape to protect your factory grille shell from scratches (as shown in photos).
5. Loosely attach the upper Billet Grille by holding the Metal Brackets behind factory grille shell and inserting the Phillips
Screws (from the front) through the Billet Grille holes and Metal Brackets, loosely secure them with Flange Nuts provided
(Figure 3).
6. Loosely attach the lower Billet Grille by holding the Metal Brackets behind factory grille shell and inserting the Phillips
Screws (from the front) through the Billet Grille holes and Metal Brackets, loosely secure them with Flange Nuts provided
(Figure 4).
Figure 3 – Attach Upper Billet Grille piece Figure 4 – Attach lower Billet Grille piece