Smittybilt 53036 Bull Bar - Manual

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 1600 Walnut Parkway, Rancho Dominguez, CA 90220
Installation Instructions
Bull Bar (#53035&53036)
06 Dodge Ram 1500
PARTS LIST:
1 – BULL BAR
2 – BRACKETS DRIVER/PASSENGER SIDE
6 – 7/16 X 1 1/4 HEX HEAD BOLTS
6 – 7/16 HEX HEAD NUTS
12 – 7/16 FLAT WASHERS
6 – 7/16 LOCK WASHERS
PROCEDURE:
1 – REMOVE CONTENT’S FROM BOX AND CHECK FOR DAMAGE. VERIFY ALL PARTS ARE
PRESENT. READ INSTRUCTIONS CAREFULLY.
2 – REMOVE LOWER URETHANE VALANCE LOCATED UNDERNEATH FRONT BUMPER
TEMPORARILY AND SET ASIDE
3 – UNBOLT (2) EXISTING NUTS LOCATED ON OUTER SIDE OF FRAME RAIL (PASSENGER SIDE
SHOWN) INSTALL LOWER BRACKET ONTO FRAME RAIL BOLTS *LEAVE LOOSE* (SEE FIG # 1)
4 – REPEAT PROCEDURE #3 ON OPPOSITE SIDE
5- INSTALL BULL BAR USING 6 – 7/16 X 1 1/4 HEX HEAD BOLTS, 6 – 7/16 HEX HEAD NUTS,
12 – 7/16 FLAT WASHERS *LEAVE LOOSE* (SEE FIG # 1)
6 – LEVEL AND ADJUST BULL BAR AS DESIRED. TIGHTEN & TORQUE BOLTS
7 – MEASURE AND TRIM LOWER URETHANE VALANCE AS DESIRED AND REINSTALL
VALANCE & FRONT BUMPER (Re-install *optional*)
.