Smittybilt CN110-S2S Sure Steps - Manual (Page 2)

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 1600 Walnut Parkway, Rancho Dominguez, CA 90220
Installation Instructions
Sure-Step (Part # CN110-S2)
88-98 C/K Pickup Standard Cab/95-99
Tahoe/Yukon 2 Dr
Fig #1 Fig #2 Fig #3
Photos are for reference only, actual brackets may be a little different.
Step Four: Repeat steps one through three on opposite side of vehicle.
Be sure to use all hardware supplied and tighten all bolts.
IMPORTANT: These side bars have a 300 lb. weight capacity. To protect your investment, wax this product after
installing. Regular waxing is recommended to add a protective layer over the finish.
Cleaning and Maintenance
To protect your investment, wax this product after installing. Regular waxing is recommended to add a
protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could
damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild soap,
window or glass cleaner may be used also.
For gloss black finishes: Mild soap, window and glass cleaner may be used.
LIMITED WARRANTY
Smittybilt (The Company) warrants to the original purchaser of this product that should the product or any part thereof, under
normal use and conditions, be proven defective in material or workmanship within the warranty period of 5 years from the date of
purchase, such defect(s) will be repaired or replaced (At the Company’s option) without charge for parts or labor. To obtain repair
or replacement within the terms of the warranty, the product is to be delivered with proof of warranty coverage ( e.g. dated bill of
sale, receipt), specification of defect, freight pre-paid with Returns Good Authorization Number from Smittybilt to place of
purchase. Items returned to Smittybilt without a Returns Authorization Number will be refused and returned to sender at the
senders’ expense.