Smittybilt 7690 Light Bracket - Manual

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Light Bracket (Part#7690)
2007-08 Jeep Wranglers
NOTE: Carefully read entire instructions thoroughly before
attempting to install this part. Drilling is required.
Parts Included Qty
Passenger side bracket (A) 1
Driver side bracket (B) 1
Antenna Bracket (C) 1
Bolts 4
Rubber Grommet 1
Protective Squares 4
STEP 1: Remove the front two factory bolts from your windshield bracket.
STEP 2: Place the protective squares over the holes on the back of the light bracket.
STEP 3: Place bracket over windshield hinge. Punch holes through the protective square and insert bolts.
Level the bracket to the desired location and tighten. ( Fig A)This completes installation for the
driver side. Continue to Step 4 for further instructions for the passenger side.
(Fig A) (Fig B)
A B
C