Smittybilt 812101 Vaulted Glove Box - Manual

WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Vaulted Glove Box
87-95 Wrangler (Part # 812101)
IMPORTANT NOTICE:
Carefully read the instructions before attempting to install this product. Smittybilt is in no way responsible
for any damage to the vehicle or personal injury that may occur during the installation or use of this product.
INCLUDED COMPONENTS
1 – Vaulted Glove Box
2 – Keys
2 – “L”-Brackets
8 – ¼”-20 X1/2” Button Head Screws
4 – Nylock Nuts
8 – Washers
INSTALLATION INSTRUCTIONS
1) Remove the three screws from across the top of the factory glove box (Figure 1). Save screws for use in
Step 6.
2) Open the factory glove box, remove the screws fastening the lid and remove the lid (Figure 2).
Figure 1 Figure 2