Smittybilt SB76791 SRC JK Tubular front Doors User Manual
Installation instructions, Src jk tubular front doors
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 W Artesia, Compton, CA 90220
Installation Instructions:
(Part # SB76791)
SRC JK Tubular front Doors
Revised 7.28.10
NOTE: Carefully read entire instructions thoroughly before attempting to install this part.
Step 1: Starting on the driver side of the vehicle, remove the (2) OE front door hinge retain-
ing nuts.
Step 2: Unplug the OE wiring harness from under the dashboard.
NOTE: Some early year models may have a red safety catch on the wiring plug. Pull
the red catch out one click and depress the black engagement tongue to release.
Step 3: Open the front door and unhook the door limit strap from the mount inside the vehi-
cle. New limit straps are provided in this kit.
Step 4: Carefully lift and remove the OE front door from the vehicle.
Step 5: Unbolt and remove the side view mirror from the OE door. Save the mirror and
hardware
for
reinstallation.
NOTE: Remove the side view mirror only not the entire mirror to door assembly.
Step 6: Install the supplied limit strap bracket (90-5868) onto the limit strap (769401).
Step 7: Slide the door hinges (93-5862 drvr and 93-5864 pass) into the OE mounting
brackets on the vehicle. Secure with the supplied 3/8” nuts.
Step 8: Carefully install the front door assembly (93-8064 and 93-8068) onto the previously
installed hinges using the (4) supplied 3/8” X 1” stainless bolts and hardware from pack (90-
6738). Install the limit strap (769401) and bracket (90-5868) to the lower hinge bolts as well.
Leave the bolts snug only at this time.
INSTALLATION:
Parts Included Qty
93-8064 Driver Side Door 1
93-8068 Passenger Side Door 1
93-5862 Door Hinge 2
93-5864 Door Hinge 2
93-5866 Mirror Bracket 2
90-5868 Limit Strap Bracket 2
769401 Limit Strap 2
90-6738 Hardware Pack:
Tube Door
1
3/8” X 1” SS Button Head Bolt 12
Parts Included Qty
3/8” Flat Washer 24
3/8” Nylock Nut 12
3/8” Hex Nut 4
90-6744 Hardware Pack:
Mirror
1
8mm-1.25 X 20mm SS Button Head Bolt 2
8mm SS Flat Washer 2
90-6766 Hardware Pack:
Tube Door
1
90-4263 Rubber Bumper 2