Smittybilt 98652 Replacement Top - Manual

WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Replacement Top
86-94 Suzuki Samurai
Parts Included Qty Parts Included Qty
Top 1 Tension Straps 2
Lock Nuts 2 Snaps with Screws 5
Machine Screws 2
Step 1: Remove old top (if equipped)
Step 2: Using care place and spread new top over vehicle. (Fig A)
Step 3: Slide plastic channel sewn into the front of the top into the windshield channel on top
of your windshield frame. Fasten the front snaps on each corner. (Fig B)
(Fig A) (Fig B)
Step 4: Unfasten the Velcro flaps on the sections over the doors and wrap around frame.(Fig B)
NOTE: Read instructions entirely before installing this product. This top is designed to be a
snug/tight fit to reduce flapping and noise. It is recommended to install this product when
temperatures are above 75 degrees. If temperatures are below this; the material can contract over
an inch. Wrinkles from packaging will go away once the material relaxes. You must have the factory
bow to install this part.
Slide plastic channel sewn into the front of the top
into the windshield channel on top of your
windshield frame. Fasten the front snaps on each
corner. Unfasten the Velcro flaps on the sections
over the doors and wrap around frame.