Smittybilt 448xx Standard Bucket Front Seat - Manual

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Standard Bucket Front Seat
(Part # 448xx)
1955-1976 CJ
WWW.SMITTYBILT.COM
Included components: Required Tools:
(1) Seat Back rest Crescent Wrench
(1) Seat Cushion Socket Set
(4) Hex Bolt M10 x 20 Ratchet
(4) Washers
Replacement Seat Assembly
1. Unwrap the side cushion trim in order to
access the bolts as shown in Fig 1.
2. Position brackets of back rest through the
slots of the cushion trim as shown in Fig 2.
3. Securely tighten the 4 bolts through the holes
of the back rest bracket to cushion frame as
shown in Fig 3.
4. Carefully wrap the side cushion trim back
over the back rest bracket and hook the trim
to the plate underneath the cushion frame as
shown in Fig 4.
Replacement Seat Installation
5. Remove old seat from riser by removing 4 bolts.
Save these bolts as they will be reused later.