Smittybilt 571035 C-RES (Cargo Restraint System) - Manual

WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
C-RES (Cargo Restraint System)
07-10 Jeep Wrangler (2-Door)
Part #571035
NOTE: You will need to have the following to install this part correctly.
1. Tailgate retaining bar and brackets.
2. OEM Door-Surrounds
Step 1: It is recommended to remove your soft top and bow assembly completely to install
this product. Remove your existing soft top and bow assembly (If equipped)
Step 2: Unfold the C-RES top and lay it our over the rear of the vehicle. (Fig A)
Step 3: Starting on the driver side attach the plastic channel in the top into the back channel
of your door surround. (Fig B)
(Fig A) (Fig B)
Step 4: Begin sliding the side channel on the top into the side channel on your vehicle and
continue around the corners.(Fig C) Repeat step 3 and 4 on passenger side.
Please read instructions entirely before installing this part
Unfold the C-RES top and lay it our
over the rear of the vehicle.
Attach the plastic channel in the
top into the back channel of your
door surround.